Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,862
- Location
- Buckinghamshire, UK. ('95 DT)
Or have a word with @kurtjohnson10 as he might have one kicking about for a few notes. That way you know you've got a working one.
P38A Eas what's what I need educating
- Thread starter stuu
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Or have a word with @kurtjohnson10 as he might have one kicking about for a few notes. That way you know you've got a working one.
- Posts
- 58,170
- Location
- Preston Lancs.
Looking at what appears to be missing a working valve block is the least of his worries. It's a bit like worrying your self to death about a broken front door lock when you don't have a house to fit the door on.
- Posts
- 13,384
- Location
- Sud ouest France !
or even a door!
stuu
Well-Known Member
- Posts
- 1,979
- Location
- Aberdeenshire
Well pipe works all there.Looking at what appears to be missing a working valve block is the least of his worries. It's a bit like worrying your self to death about a broken front door lock when you don't have a house to fit the door on.
Height sensors are there plus I've 4 known working ones sat.
The tanks there.
Iv the relay sat.
Ecu Iv got one being sent on the way now.
Apart from putting 4 airsprings on and calibration what else is there?
Surly using that valve block I'd burn out the compressor?
My method of thinking may not be the same as yours but I'd rather ask someone that knows then blow somthing up the 1st time I try to raise the car.
Iv never delt with the eas so it's a learning curve aswell for me
stuu
Well-Known Member
- Posts
- 1,979
- Location
- Aberdeenshire
i will say sorry if I'm being a pain in the ass
Or looking like I'm asking stuff in the daftest possible way
Or looking like I'm asking stuff in the daftest possible way
kurtjohnson10
Well-Known Member
- Posts
- 15,236
- Location
- midlands
p.m me if you need one - Kurt
- Posts
- 58,170
- Location
- Preston Lancs.
You are not being a pain. Refurb the block if you want to but you will not find out if it is all serviceable until it is connected to the system. Get what you need to do all the jobs couple them all up and see what you have. You may like to get some at least EAS diag if you have none.
stuu
Well-Known Member
- Posts
- 1,979
- Location
- Aberdeenshire
Thanks dude away to get one off kurt
diaphragm is split anyway haha
stuu
Well-Known Member
- Posts
- 1,979
- Location
- Aberdeenshire
Eas diag will a laptop eas unlock and a lead be upto what I need it for?
- Posts
- 58,170
- Location
- Preston Lancs.
Yes.
stuu
Well-Known Member
- Posts
- 1,979
- Location
- Aberdeenshire
Perfect
thanks again
Ruby Range
Well-Known Member
- Posts
- 338
- Location
- Sandwich Kent
Look on the web at PaulsP38.com. This gives a great explanation of what the EAS is all about plus great pics for rebuilding the compressor and valve block and the sequence for resetting the sensor heights which you will need to do.
Similar threads
