P38A Eas symptoms..

wammers said:

If it's just pleasing itself and going up and down maybe the driver pack is the next to try can't be a lot else if as you say it doesn't drop parked..

Click to expand...

Exactly, when parked up over night, for the weekend or even a week it never alters. Apart from the auto leveling.
Thank you for giving me your Tony. I do appreciate it.

So just to clarify please, you dont run the car while the diagnostics are on going?

the original pack.

doner on the left.

Mark Piercy said:

So just to clarify please, you dont run the car while the diagnostics are on going?

Click to expand...

Ignition at position 2 engine off.

wammers said:

Ignition at position 2 engine off.

Click to expand...

Thats what i thought, thanks Tony.

Well...would you believe it!!

Driver pack swap and no difference

Mark Piercy said:

Driver pack swap and no difference

Click to expand...

Is there nothing at all showing on diag?

All i get is "vehicle has moved"
Never any difference Tony.....

hopefully you can see the results when i "get" the readings are always the same as the programmed readings.
actual heights!

in the box F9 there is the number 128?

Got me beat then, all heights are within parameters so they should not cause any problems. Unless you have two duff driver packs has to be ECU i would think. Vehicle has moved means nothing.

You see, i thought the top 'get' section read the actual height and the bottom 'write' section told the programmed height??

I really am disheartened right now

Mark Piercy said:

I really am disheartened right now

Click to expand...

Haven't used the EASunlock for a while, if i needed to set anything i would use Nanocom but it's not needed touching since i did it with EASunlock some time ago. Do you not have the instructions that come with it?

Tried the ecu and still no change.
Ive pulled the block and im going to check the solenoides....
It might be springs for Christmas..
I couldn't find the info on what i needed with the instructions, but then i dont read very well

front and rear valves are all like this.....

Pull them pack out and cut them flush.

wammers said:

Pull them pack out and cut them flush.

Click to expand...

How did you cut them Tony?