EAS Problems P38

Mamasbigtruck said:

So lunchtime tested thermal switch with circuit tester and it checked ok closed circuit

Forced run pump for 5 mins, got hot but not to hot, themal switch still closed,

Pulled line from air tank, and hell of a pressure release.

Wondering if it's actually clearing fault properly on software, funny how RSW pdf doc states one way of using soft ware and help section in software itself is slightly different.

Click to expand...

Mamasbigtruck said:

Nanocom was a breeze I must admit but no longer have it, so this will have to do, have tried various different ways of using software, the in software guidance seems most likely,

Is there anyone in west sussex with a nanocom willing to unlock and see if it's software not the car anymore,

Click to expand...

Mamasbigtruck said:

So lunchtime tested thermal switch with circuit tester and it checked ok closed circuit

Forced run pump for 5 mins, got hot but not to hot, themal switch still closed,

Pulled line from air tank, and hell of a pressure release.

Wondering if it's actually clearing fault properly on software, funny how RSW pdf doc states one way of using soft ware and help section in software itself is slightly different.

Click to expand...