Hi on the eas on my p38 the exhaust on the valve block ther is small leak all the time i put my finger over the exhaust and the compressor tone changers and it will not go up i have checked the exhaust vallve and that looks ok ( not sticking ) !!!!!!!!!HELP!!!!!!!!!
EAS p38 !!!!! HELP !!!!!
- Thread starter p38Lover
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 45,852
- Location
- Near Poitiers SW France
That will be a leaking diaphragm valve then. Time to overhaul the valve block. you can get the bits from symlise on ebay (no connection)
Datatek
Well-Known Member
- Posts
- 45,852
- Location
- Near Poitiers SW France
If there is air leaking from the exhaust it is the usual culprit. Easy enough job, just need to be clean and careful. If there are any white powder deposits in the valve block, replace the air dryer as that is a sign of the dessicant breaking up.
Datatek
Well-Known Member
- Posts
- 45,852
- Location
- Near Poitiers SW France
If there are bits floating around in the valve block they are probably from the dryer, good idea to replace it when you do the block
