EAS codes do you know how to fix ?

Hi all,
Two days before hols in Dorset and EAS fault code.

All 4 lights alight on height indicator, EAS fault on dash and signal for wade.

Reading with the new software and lead ....

0:FL signal incorrect
7:Vehicle has moved

Does this mean anything to you?
Is there a list of codes and what to try?

Desperate for fix before Wednesday

Please help if you can

Regards Fred

Sorry no idea on the codes , but have you used the EAS Calibrate program to see if any of the height sensors are sending a reading that is way out compared to the others, maybe a piece of a sensors linkage has become disconnected giving a false reading or a height sensor failure.

FL signal incorrect i am almost sure is passenger front hieght sensor easy to check though swap the front ones over as they are not sided and it will use the other part of the sensor it doesnt normally use i am not sure wether that will make it go into wade mode though mine used to sit at normal ride hieght all the time.

Thank you I will go and try

Fred

The wade sign, in conjunction with all the lights lit up is just to indicate that the EAS is in fault mode.

I have checked the calibration heights and front and rear although not identical are all very close. I am not on completely level ground here though.

Can anyone point me to where the height sensors are as I can't find them?


This fault clears it's self when left for a short time and re-appears when driven for a while.
Time before EAS fault appears seems to differ each time.

Thank's for your help so far.

Fred