Early series 3 engine bay layout

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

Demelza

Member
Posts
64
Location
Cornwall
I have recently completely renovated a late series 3 and enjoyed it so much I bought a 1973 series 3 petrol to do it again. This one has been messed about with a lot over the years and I’m looking for a correct engine bay picture showing how it should be laid out, particularly the brake layout without servo and carb/ air filter. The 83 late one was completely original so was no problem. Thanks in anticipation.
 
Demelza said:
I have recently completely renovated a late series 3 and enjoyed it so much I bought a 1973 series 3 petrol to do it again. This one has been messed about with a lot over the years and I’m looking for a correct engine bay picture showing how it should be laid out, particularly the brake layout without servo and carb/ air filter. The 83 late one was completely original so was no problem. Thanks in anticipation.
Click to expand...
Welcome to LZ!

Tech questions are best posted in the Series section.
But as you are here, I can suggest the good underbonnet pictures in the Haynes manual, or the drawings in the genuine manual.
 
Ok
7BEB004C-93DD-47AD-87EB-2BE7C05D87BD.jpeg
 
I have owned it for about 15 years, it was low mileage but the mot ran out and left outside it deteriorated. Decided to rebuild it under lockdown with a new chassis and bulkhead.
 
You must log in or register to reply here.

Similar threads

zooropa1993
Rainers Series 3 from Bremen
Replies
9
Views
1K
Flat frog
F
P
Returning Zoner , asking about early Freelander filters.
Replies
3
Views
604
brianp38dse
brianp38dse
D
Early series 3 engine compartment layout
Replies
5
Views
1K
Demelza
D
A
1978 Land Rover 3 Series - Santana, engine 10J, diesel. Engine head features i
Replies
0
Views
410
Afonso
A
British Leyland Rover
Series 3 Landrover owner
2 3 4
Replies
77
Views
6K
British Leyland Rover
British Leyland Rover
Back
Top