Driver demand coded

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Kwaka-mark

New Member
Posts
7
Location
Norfolk
Just got my td5 ready for mot and abs threw me a curve ball on the morning of the mot with both abs sensors going down which in turn sent the traction control into a fit of being permanently on. Anyway solved the abs / traction control issues all done, no lights on abs no codes. However on check on a fox well and a snap on one after the other she’s know throwing up 2x driver demand coded 4 and 32 (manual gearbox) anyone help before I spend another pain staking week trying to sort it?? cheers in advance
 
Just got my td5 ready for mot and abs threw me a curve ball on the morning of the mot with both abs sensors going down which in turn sent the traction control into a fit of being permanently on. Anyway solved the abs / traction control issues all done, no lights on abs no codes. However on check on a fox well and a snap on one after the other she’s know throwing up 2x driver demand coded 4 and 32 (manual gearbox) anyone help before I spend another pain staking week trying to sort it?? cheers in advance
Well as I have a spare truck here after reading that it could be the throttle pedal I changed that this morning, cleared codes and to no avail same codes are still present, could it be ecu? And if so how hard are they to swap out ?
 
Sorry wasn’t ignoring your comment, bobbed out this morning and bought a new multimeter and new battery charger, to answer your questions 12.6 and 14.4 all good and dandy, fully charged it to make sure and to no avail no change :(
 
Back
Top