Drive train

So a u joint went out on my front axle and I took it off so I could replace it. My thinking is that it not in 4 wheel so I could still drive because the rear is still attach. Put it in gear and tried and got nothing. Is that what was suppose to happen or do I got a bigger issue? Another question I got is, since I'm not anywhere near home can I use the rear drive shaft in the front until the u joint comes in?

It's a 90 by the way

You need to stick in the diff lock to drive without front prop.

wot he said...

Carrington224 said:

You need to stick in the diff lock to drive without front prop.

Click to expand...

Ahhh ok so would you recommend driving like that at all? Tried the diff lock and that worked which is def a sigh of relief. Now it just needs to make it back home from Germany.

So If I go around driving with the diff lock on but no front shaft connected am I going to screw anything up?

What do you mean back home from germany? As in to the uk? Driving? . It won't bugger anything up but its by no means a long term solution. Just get a new UJ on, anywhere should be able to fit one

the_wolf said:

What do you mean back home from germany? As in to the uk? Driving? . It won't bugger anything up but its by no means a long term solution. Just get a new UJ on, anywhere should be able to fit one

Click to expand...

Yea I finally found one and got it fitted but it cost me 70 euros. So that was fun. Thanks for the input though

**** to drive in 2wd loads of transmission slop, even more than normal!