metropolis2
Active Member
- Posts
- 169
- Location
- hawarden flintshire
Hi all ive a 2012 RRS has anyone taken the front drivers side door seal off, the one attatched to the body not the actual door, if so how easy/hard is it.
Door seal.
- Thread starter metropolis2
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Have you got a new seal to put on?
I am sure its an easy DIY if you look at it. probably need a few trim bits removed (guessing
) which can always be challenging, with old brittle clips but yours is a youngster so may be ok, ish.
Why do you need too?
J
I am sure its an easy DIY if you look at it. probably need a few trim bits removed (guessing
) which can always be challenging, with old brittle clips but yours is a youngster so may be ok, ish.Why do you need too?
J
metropolis2
Active Member
- Posts
- 169
- Location
- hawarden flintshire
my old seal has split , and ive seen a few about on line so its desition time.Have you got a new seal to put on?
I am sure its an easy DIY if you look at it. probably need a few trim bits removed (guessing
Why do you need too?
J
my old seal has split , and ive seen a few about on line so its desition time.
I would guess if you get a new 1 you will see how much rubber/fixing you have and look and see what you can see with it fitted on the car so will give you an idea of what needs removing. But still DIYable
I would think.Cant give anything else I am afraid.
J
