Door barrel change

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
whoops,
thats come up as alternator, but the door lock one is on there.
Very helpfull site
Think it's someone on here?
If so thanks a lot
Rick
 
Mine is the same as the front ones but it was a tricky job.

Whilst the mechanism was off I stripped it down and replaced the small return spring (it's in my gallery - fleabay £5).
 
I just fitted a new rear lock assy to my 90 and it wasnt hard to swap the lock over.


Lynall
 
It will probably be a lot cheaper if you strip the locks and repair them - the bits are all available on fleabay.
 
I am looking at doing that and just changing the barrels but I am getting some conflicting advice.

Some online parts shops have said that a certain barrel will fit but others including eBay sellers say they won't. I just want to make sure I get the right part 1st time round and ideally change the front doors too so I only have the 1 key.

I am still getting conflicting advice as to whether the front doors and rear door use the same lock barrel. Also whether the barrels are the same for my handles (lift up) as they are for push button type.

My 90 is a 1986 model.

Thanks for any help in pointing me in the right direction fir the correct barrels.
 
Might be worth giving Rimmers a call if answers not forthcoming here

Know they sell barrels and are usually helpful

Sorry, but would be guessing myself
 
Back
Top