saxon
New Member
- Posts
- 8
- Location
- Chesterfield
Is there anywhere I can get a fully working spare key for my old Disco without getting flrrced by a main dealer, I'm in Deepest, Darkest Derbyshire,,,Thanks.
Discvery 2,TD5
- Thread starter saxon
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
saxon
New Member
- Posts
- 8
- Location
- Chesterfield
Fully working, central locking Alarm etc
34064
Active Member
- Posts
- 283
- Location
- Now back in Dorsetshire
Yep buy the blanks from ebay get the key cut insert old computer chip into new key fob or you could go down the D3 key fob route too
L90 BCM
Active Member
- Posts
- 328
- Location
- War-wick-Shire land
if you want a new key ie with fob on it, then it needs to get programmed to you vehicle as there is a number in the key fob itself ( EKA code ) that has to be entered into the ecu using nanocom or something similar.
have a look a this Land Rover Discovery II
have a look a this Land Rover Discovery II
saxon
New Member
- Posts
- 8
- Location
- Chesterfield
Only got the one key and need two, so I've got to get the complete gubins and have it keyed into the truck
34064
Active Member
- Posts
- 283
- Location
- Now back in Dorsetshire
Only got the one key and need two, so I've got to get the complete gubins and have it keyed into the truck
Thats a bummer then get whoever programmes the key to make sure you only have your 2 keys on it too
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
Think you could buy a 2nd hand unit from a well known auction site and get someone with nanocom to programme it for you
cambridgecockney
Active Member
- Posts
- 714
Buy a used one off ebay and a new blank. then get it programmed with nanocom i have programed several also rover 75 key works.
saxon
New Member
- Posts
- 8
- Location
- Chesterfield
Does anyone do the programing around my neck of the woods??????
