On or around Wed, 09 Feb 2005 13:51:08 GMT, "Richard" <richardsemail
[email protected]> enlightened us thusly:
>My 1995 Discovery has the tail light and indicator in the bumper. If I were
>to get the other style where the tail and indicator is higher p is it easy
>to wire up to have four indicators etc...
d'you mean it's the kind without the tail/ind in the normal cluster?
not hard, ISTR. You'll probably need the other model of flasher unit
though. The flasher unit has a sensor to flash a little trailer when the
trailer indicators are on it as well - the one you have in there will do
this with 3 bulbs in circuit (or more, hence why it does it when you put the
hazards on), you need one that's a "3+1x2" not a "2+1x2", which is what
yours probably has. Either that or have the little trailer flashing all the
time, which rather defeats the object if you do tow a trailer.
apart I think there may be some additional wiring to do, but not that much.
If buying new bits you'll need the other type of lens unit plus the
bulbholders etc. to fit into it. You can also use the lamp units from a
scrap maestro van.
--
Austin Shackles.
www.ddol-las.fsnet.co.uk my opinions are just that
"Remember that to change your mind and follow him who sets you right
is to be none the less free than you were before."
Marcus Aurelius Antoninus (121-180), from Meditations, VIII.16
K
