RollingBear
New Member
- Posts
- 1
Hi all,
I know this is a boring old chestnut, but wondered if anyone had solved the no power to new actuator problem?
I have bench tested actuator and door release with 12 volts, all fine, but actuator is not getting any power from loom. Have checked wiring inside rubber where it goes from tailgate to body and all looks fine. Fuses are good but no power when micro switch pressed or from remote key.
Has anyone else come across this and solved it?
Cheers
Phil
I know this is a boring old chestnut, but wondered if anyone had solved the no power to new actuator problem?
I have bench tested actuator and door release with 12 volts, all fine, but actuator is not getting any power from loom. Have checked wiring inside rubber where it goes from tailgate to body and all looks fine. Fuses are good but no power when micro switch pressed or from remote key.
Has anyone else come across this and solved it?
Cheers
Phil
