Discovery 4 EAS in 'Extended Mode'

Amk rebuild videos

Valve block rebuilds , if the system is full of white dust unless u can blow out all of it u may need to replace them

personally mine had more leaks than a colander and had to replace a lot of parts, plus as mine leaked I had to make up test rigs to rinds all the leaks, but know u mentioned urs not dropping so hopefully ur just need to blow out each line and then rebuild or replace

Wow thanks! I had a feeling I could do better! The roverparts guys are definitely very helpful but quite pricey.
The advancedfactors is a blessing! Lets hope shipping does not kill it……

landyLR4 said:

Wow thanks! I had a feeling I could do better! The roverparts guys are definitely very helpful but quite pricey.
The advancedfactors is a blessing! Lets hope shipping does not kill it……

Click to expand...

ur so very welcome , think ur be very surprised with the gap iid in its capabilities , ur also find them extremely helpful and will always get back to u quickly , the suspension calibration is also very easy to use

found a video for u showing the process, forget the second adaptive bit as that’s for range rovers but the first bit where he goes through the suspension calibration and how easy it is

pleased the above was useful and how u get on

think it’s around the 20 x min mark

I am new to LR. I am getting different values in 4 corners, also the numbers are changing overnight. Does anyone know what negative means ?

that means you have leaks in either the air bags or in your valve blocks (or both).
how many miles on your vehicle?

uprasenjit said:

I am new to LR. I am getting different values in 4 corners, also the numbers are changing overnight. Does anyone know what negative means ?

Click to expand...

If its sitting level dont worry.