Discovery 300tdi?? info sought

right guys where does you tempreture gauge sit on a run??

my milometre clocker only works occasionally, what issue could it be,

and what do you do to sort out door locks, i have had two disco's now and i know its a fault of them, just seeing if there is an easy remedy

thanks and look forward to hearing from you helpful lot

1/temp needle just below half way up
2/ dodgy clock maybe no thoughts if speed is reading correctly
3/use a key be more specific as to "sort out locks"
If you mean press unlock and button moves a bit and drops again its your lock springs thread on this site sticky at top of disco section covers how to and where to get them - easy job fiddly but doable by most


Top
Sticky: Disco Door springs How-to... ( 1 2 3 4 5 ... Last Page)
lerk


http://www.landyzone.co.uk/lz/f8/disco-door-springs-how-101126.html

300 Tdi
Temp gauge sits just below horizontal. I have no fan fitted but it never varies.

My trip gauge is a bit dicky.
If I press the re-set too hard it will zero but fail to register - it will click as the cog on the number wheel ALMOST catches but not go round.
So I press the re-set just enough to get all the zeros up & this seems to work.