disco wheels ok on 1986 110?

finbar · Jan 21, 2009

p reg disco alloys onto 1986 110? seem to fit ok, any reason not to fit them? safety etc?

boydy1989 · Jan 22, 2009

make sure the rear brake drum aint a force fit into the alloy - if it is you will weaken the wheel, making them unsafe.

Oh yeah, make sure you use the correct wheel nuts also.

Sean · Jan 22, 2009

seem to remember that disco alloys are fine on 90s but not load rated enough for a 110

boydy1989 · Jan 22, 2009

there y'are.

Isn't there different types of disco alloys you can get? My donor disco had compomotive alloys on, i seem to remember they had a different hub shape. I could be completely wrong though.

finbar · Jan 22, 2009

thanks guys, good info, will check out before going ahead. BOYDY, been reading your 300 conversion article, superb. i have a 1986 110 lt77/isuzu i'm gonna put in disco 300. only problem is i dont have old lr flywheel to use as you did. do i source a flywheel and go down same route you did or fit whole disco box/300 and fit a def r380 top linkage etc like i read on one of your other threads. i have access to complete disco. is it worth fitting disco axles or are they weaker? any advice appreciated cheers.

boydy1989 · Jan 22, 2009

the 300 tdi flywheel is fine - its just the housing i swapped to make it go into the gearbox.

The existing tdi housing will fit, you jus gotta miss out a couple of studs.

Fitting the top linkage looks to be a gearbox in pieces job - stick with yours i would say.

Mine has both disco axles fitted, they will be 24 spine diffs which means less free play, and, depending on who you ask, a wee bit stronger.

Also means you get disc brakes, and both my axles were a bit past it anyway.

disco wheels ok on 1986 110?

finbar

New Member

boydy1989

Well-Known Member

Sean

Banned

boydy1989

Well-Known Member

finbar

New Member

boydy1989

Well-Known Member

Similar threads