Disco Cruise control

Hi All
My 99 ser 11 Disco's cruise controll doesn't work.
The on/off switch light comes on but that's it.
Any idea's as to what could be wrong or where is a good place to start.
Cheers
Cappy

So Caploc was, like

> Hi All
> My 99 ser 11 Disco's cruise controll doesn't work.
> The on/off switch light comes on but that's it.
> Any idea's as to what could be wrong or where is a good place to
> start. Cheers
> Cappy

Most common reason would be a split in the rubber pipe to the cruise
actuator. Don't know where it is on the Disco; on the P38 it's under the
bonnet on the LHS of the bulkhead. Dead easy fix. (Thanks David French -
still grateful.)

--

Rich

Pas d'elle yeux Rhone que nous

On Sun, 13 Mar 2005 22:21:26 GMT, Caploc wrote:

> My 99 ser 11 Disco's cruise controll doesn't work.

Diesel or petrol?

On the diesel the engine is completely "fly by wire", tell the ECU to
cruise by fitting the switches (hence the cheap kit) and waggling them
and it does. The petrol one needs acutators to physically move
throttle linkages etc.

> The on/off switch light comes on but that's it.

ISTR that just means that the switch has worked.

--
Cheers [email protected]
Dave. pam is missing e-mail

I have had the vacuum pipe split in several places over the last few years.
Its getting shorter and shorter!!
Most common place is where it goes on the actuator, but check all of it.
Richard


"Caploc" <[email protected]> wrote in message
news:[email protected]...
> Hi All
> My 99 ser 11 Disco's cruise controll doesn't work.
> The on/off switch light comes on but that's it.
> Any idea's as to what could be wrong or where is a good place to start.
> Cheers
> Cappy