I would be pleased if someone will send me a scan of an instruction sheet for a LandRover "plug-in" towbracket thing for the Disco 3.
My chum bought one from a private seller, and it didn't work - the locking bolt would not withdraw - at best it would only pull in about half way. Nor would it lock in. This meant he could not even fit it to the car. I took it to bits this evening and clearly the rack on the bolt and the gearteeth on the shaft were way out of correct settings. So I fixed that, and now it SEEMS to be OK, but the little key will still not lock the knob.
Now I know we all like our knobs to be locked, so I wouldn't mind reading the manual sheets to be sure I'm on the right lines.
It would be bad if the thing fell off with a 3 ton trailer attached ....
CharlesY
My chum bought one from a private seller, and it didn't work - the locking bolt would not withdraw - at best it would only pull in about half way. Nor would it lock in. This meant he could not even fit it to the car. I took it to bits this evening and clearly the rack on the bolt and the gearteeth on the shaft were way out of correct settings. So I fixed that, and now it SEEMS to be OK, but the little key will still not lock the knob.
Now I know we all like our knobs to be locked, so I wouldn't mind reading the manual sheets to be sure I'm on the right lines.
It would be bad if the thing fell off with a 3 ton trailer attached ....
CharlesY