disco 2 year 2000 v8

guinness · Jan 16, 2007

hi just had new head gaskets fitted ,heads skimmed and rebuilt after blowing head gasket.
was ok for a few days but have a problem with temp gauge going up and down ,and a small loss of coolent.
will be taking back into the garage just to check over again as work is under warrenty.
cannot see any leaks from hoses or rad and now running out of ideas any body help out there.

thanks

clutchdust · Jan 16, 2007

Could be a small amount of air in the cooling system which wasn't bled out properly or worst case scenario, a porous cylinder liner.

eightinavee · Jan 16, 2007

Got it on LPG then ?

guinness · Jan 17, 2007

hi took it back to the garage they think they found a small leak just below thorttle inlet 2 small pipes ,but may need a new gasket underneath where they connect. if not if it is a liner gone what can i do with it .
thanks will keep you posted

disco 2 year 2000 v8

guinness

New Member

clutchdust

Well-Known Member

eightinavee

Well-Known Member

guinness

New Member

Similar threads