Mat ayton
Member
- Posts
- 27
- Location
- North Yorkshire
Want to wire up our radio properly so aftermarket radio holds its stations properly but need to know which wire is which
Thanks
Matt
Thanks
Matt
Disco 2 radio fault
- Thread starter Mat ayton
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
notenoughtime
Active Member
- Posts
- 439
- Location
- Essex
You may struggle wiring an aftermarket stereo in due to the amps that are fitted under the seat
Mat ayton
Member
- Posts
- 27
- Location
- North Yorkshire
Thanks it's been in a while before we bought it but it gets annoying but it's handy for the mrs been Bluetooth
notenoughtime
Active Member
- Posts
- 439
- Location
- Essex
Normally a good idea to introduce yourself rather than just asking for help from the off!
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Download a copy of rave it should show you the radio wiring.
Do a search on here for rave download.
Oh , and welcome by the way.
Cheers
Do a search on here for rave download.
Oh , and welcome by the way.
Cheers
brian47
Well-Known Member
- Posts
- 8,867
This is the pin-out for the standard ISO connectors. In some cases, the +12v Battery and the +12v Switched are swapped around. In either case, the radio will work, but if the wiring is the wrong way round it won't "remember" the settings.
