- Posts
- 67,744
- Location
- halfway between here and there.
Well you have fitted a new harness now,is it the genuine one,or the pattern part?
Disco 2 loss of power on motorway help needed parked up
- Thread starter Drummer87
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Well you have fitted a new harness now,is it the genuine one,or the pattern part?
- Posts
- 67,744
- Location
- halfway between here and there.
great,that should hopefully sort the problem out,how far is your uncles place from yours?.
- Posts
- 67,744
- Location
- halfway between here and there.
ok,well if anything does show up,it will be in that distance.Hopefully you have sorted it now.
Very true. It's driven fine tonight. So all is good. Got to love owning a new car and finding all these issues.
Starter motor issue fixed
Three amigos fixed
Hopefully injector misfire rough running fixed
Now boot door leak from the seal
And hopefully get to then add off-roading expedition parts and take it to the west coast
Starter motor issue fixed
Three amigos fixed
Hopefully injector misfire rough running fixed
Now boot door leak from the seal
And hopefully get to then add off-roading expedition parts and take it to the west coast
- Posts
- 67,744
- Location
- halfway between here and there.
notenoughtime
Active Member
- Posts
- 439
- Location
- Essex
Great stuff, glad it's sorted
markomate
Member
- Posts
- 53
- Location
- Bedfordshire/Estonia
Looks like that was the problem then!
BTW I commented on my first intro post here that I had my doubts about how oil in the loom would cause issues, this was based on my customers using oil as an insulator in power systems.
I also said on this thread that it must be something temperature related, what I didnt think of was how oil conductivity is increased when it gets hot!
In addition any "contamination" will probably increase conductivity as well.
Its actually very well documented (and argued about on other forums!)
I cant seem to post a link but google "oil conductivity temperature" a company called OELCHECK comes up, theres quite a good description of the process.
So that could explain why the oil/loom issue can manifest its self as the engine warms up.
Ok time to take off my anorak and enjoy Christmas eve in the snow!
Mark
BTW I commented on my first intro post here that I had my doubts about how oil in the loom would cause issues, this was based on my customers using oil as an insulator in power systems.
I also said on this thread that it must be something temperature related, what I didnt think of was how oil conductivity is increased when it gets hot!
In addition any "contamination" will probably increase conductivity as well.
Its actually very well documented (and argued about on other forums!)
I cant seem to post a link but google "oil conductivity temperature" a company called OELCHECK comes up, theres quite a good description of the process.
So that could explain why the oil/loom issue can manifest its self as the engine warms up.
Ok time to take off my anorak and enjoy Christmas eve in the snow!
Mark
Oh your lucky mark you have snow.
Scotland has nothing with us atm just sun lol.
Your right enough thought guess all those hear cycles on the look finally took its toll on a long journey and the vibrations through the engine.
I'm yet to clean down the old loom and see how brittle they become. I need to double check the connector plug and give it a good clean out today.
Least I have a spare in the boot now, as I read on disco2 website to change every 3 years as a preventive maintenance.
I'm assume the injector plugs can withstand oil being in the plug more than the actual harness plug to ecu.
Scotland has nothing with us atm just sun lol.
Your right enough thought guess all those hear cycles on the look finally took its toll on a long journey and the vibrations through the engine.
I'm yet to clean down the old loom and see how brittle they become. I need to double check the connector plug and give it a good clean out today.
Least I have a spare in the boot now, as I read on disco2 website to change every 3 years as a preventive maintenance.
I'm assume the injector plugs can withstand oil being in the plug more than the actual harness plug to ecu.
notenoughtime
Active Member
- Posts
- 439
- Location
- Essex
Heating and cooling issues soon makes thing brittle
markomate
Member
- Posts
- 53
- Location
- Bedfordshire/Estonia
Yes Im lucky, Im in Estonia, nice and snowy and -10 soon! -30 not uncommon. But we still have outside barbies, with lots of icy vodka!
Insulation probably ok, it may be a capacitance issue which could explain why the closely bunched wires in the loom are affected rather than the spread apart wires in the injector plugs.
just a theory though!
Enjoy Christmas!
Insulation probably ok, it may be a capacitance issue which could explain why the closely bunched wires in the loom are affected rather than the spread apart wires in the injector plugs.
just a theory though!
Enjoy Christmas!
After a week plus of running the disco with the new loom just pulled codes from the car.
So egr stuck open, time for a blanking kit I guess
The three air flow warning are these more the wiring side of things? I do have a second maf at hand to try it's not brand new but is Genuine.
The 160 can fault what is this all about can't find a description on a quick goodie search.
Happy new year all.
Chris
Similar threads
