Alasdairgill
New Member
- Posts
- 4
- Location
- portsoy
Hi all got a problem my disco air bag on drivers side has went up an won't go back down please help��
Disco 2 air bag up at one side
- Thread starter Alasdairgill
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
er.. WELCOME! I guess!
Not sure about the SLS system - my D2 was on coils before I bought it. Have you got access to a diagnostic (Nanocom, Hawkeye, Lynx, Testbook) which may help. Can you not just disconnect the air hose to that bag and then let it down? CAUTION - I don't know if they have a valve to let you do that.... don't want it going bang on you if you pull the pipe off.
Not sure about the SLS system - my D2 was on coils before I bought it. Have you got access to a diagnostic (Nanocom, Hawkeye, Lynx, Testbook) which may help. Can you not just disconnect the air hose to that bag and then let it down? CAUTION - I don't know if they have a valve to let you do that.... don't want it going bang on you if you pull the pipe off.
Alasdairgill
New Member
- Posts
- 4
- Location
- portsoy
Well I took the pipes off it went right down but when I put them back on the same happened again the drivers rear went right up when i started her back up��
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
Height sensor out of calibration?
Alasdairgill
New Member
- Posts
- 4
- Location
- portsoy
Mite need to go to the garage i think an get it on the computer.
Last edited:
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
Anyone in your area who's got a diagnostic who might let you plug your Landy in for free/small fee? Post up your location and ask 
owl
Well-Known Member
- Posts
- 1,807
- Location
- Breaston Derbyshire
Have a look at the height sensor, the rubber end on the link rod splits.
