Disco 1 Front Brakes + Indicators...

Hi all

So far I've replaced the Shocks, Turrets, Discs and Pads as well as sorting out a few electrical problems....but one electrical problem is befuddling me, the other problem is, well a supply problem.

Electrically the indicators work fine on my Disco 1. However the dash board light doesn't work. I've had the dash out and cleaned all the contacts, and checked with a meter. Nothing on the lamp "socket" (really a bit of plastic PCB). As the indicators all work, I am assuming its the actual Flasher unit itself, or have I got it wrong ?

The other problem is I need to get a piece of Brake pipe for the drivers side front caliper. The solid one has a fracture in it. Craddock + Paddock don't seem to have individual pipes listed.....any ideas ?

Ta

Adrian

yer right about the relay unit. it dose work the dash indicator and thats probably where the problem is !
as for yer brake pipe, most local garages / motor factors will make you up a new lenght of pipe to suit yer needs , just give em the lenght /and what fiitings you need on it ..male /female then yer can bend it yerself to suit, should only cost you a few squids!

as for yer brake pipe, most local garages / motor factors will make you up a new lenght of pipe to suit yer needs , just give em the lenght /and what fiitings you need on it ..male /female then yer can bend it yerself to suit, should only cost you a few squids![/quote]

Or you can get flexible ones from scorpion etc.... but they will probs cost a lot more!!!

Thanks