disc brakes

hi chaps i got a landy 90 2.5 d it has discs on the front but drums at the back which i'd like to have disc's all round how easy is this to doand what parts would i need it's a 86 the year if it helps i'm sure this would of been done before but as i'm new to landy's i'm what you call clueless lol all help as always is appreciated

The easiest way is to swap the back axle for a disco one.

I priced them up a few months ago. And to get hold of one it's a matter of putting your name down as they are snapped up pretty quickly.
£200 ish with discs and callipers from a back street breakers in Hull.
£300 ish without callipers and discs from Simpsons salvage near York.

Apparently the only advantage of fitting discs is that they are easier to clean after going offroad!

Exactly the same setup on my 2.5NA, the axle was changed on mine, needed a new axle anyway as the old one had rusted.

is it a straight swap or is there loads of mods to be done ??

Basicly a swap, unbolt the old one, unbolt all the other stuff, take it out, roll in the new one, bolt it all up and then plumb in the brakes.

cheers m8tey i'm off too find a cheap disco axel does it have to be from a diesel or again will they all fit

I'd be intersted to know know how you get on.

Any will do.