Diff lock switch

I had to take the TD5 90 to get a faulty clutch release bearing changed today and my missus has collected the vehicle.
The garage said they’ve “forgotten to reconnect the diff lock light” but l can either take it back or do it myself.
Is this switch easy to reconnect, and where is it located.
How do l get to it, from underneath or can l get to it by taking off the cover under the central seat box?

Between the seats, maybe you can get to it but you should be able to see with center seat box cover off.
On right side depending on type transmission/transfer case.

On the LT77 box you really need the drivers floor plate out but you haven't got that gearbox so I don't know. No help I know, just sayin'

Flossie said:

On the LT77 box you really need the drivers floor plate out but you haven't got that gearbox so I don't know. No help I know, just sayin'

Click to expand...

That is also what my experience is based on, it is very easy to connect it is just a couple of spade connectors, it is the amount of panelling that you need to remove to access it that is the problem. I would start by removing the centre seat access panel And having a look. That should give you a good idea of what else you will need to take off to get to it.

OK thanks l will have a look tomorrow.

The garage has said just bring it back, so l will call in with it next week if l can’t do it.

OK so l took off the cubby box and the metal cover underneath.
The connectors were right there on top of the transfer box and l was able to re connect them.
The connector plug also slides on to a metal bracket.

lightning said:

The connectors were right there on top of the transfer box and l was able to re connect them.

Click to expand...

'Appy days .