Diesel pump locking tool

MrPlow · Nov 24, 2022

Hi all,

I have a 1990 90 with a 2.5td 19j engine. The diesel pump is leaking out of the spindle so needs to come off. Is it possible to take the pump off without taking the front cover off?
I see there is a kit available for the 200 and 300tdi engines to lock the pulley. I can't find anywhere that confirms you can do this on the 19j engine. There is a small inspection cover on the front cover, just not sure of the tool I need?
If anyone thats done it could confirm it would be great?

Cheers

Liam

tottot · Nov 24, 2022

Yes you can. Paddock motors have a good video of how to do.

MrPlow · Nov 24, 2022

Thank you. I've seen the video, looks like it refers to the 200tdi though?
Gladly be corrected if I'm wrong?

tottot · Nov 24, 2022

Locking tool set on the Fleabay suitable for 300tdi. 200tdi, 19j and 12j engines. £30ish.

lynall · Nov 24, 2022

MrPlow said:
Hi all,

I have a 1990 90 with a 2.5td 19j engine. The diesel pump is leaking out of the spindle so needs to come off. Is it possible to take the pump off without taking the front cover off?
I see there is a kit available for the 200 and 300tdi engines to lock the pulley. I can't find anywhere that confirms you can do this on the 19j engine. There is a small inspection cover on the front cover, just not sure of the tool I need?
If anyone thats done it could confirm it would be great?

Cheers

Liam

The cheap kits come with the plate to hold the inj pulley in place whilst you remove the inj pump, but unsure if it works on the 19j.
But if the pump has been leaking diesel into the timing chest!

tottot · Nov 24, 2022

The set I looked at in my post above listed as suitable for use on 19j. But as Lynall says you will need to check belt for contamination.

Diesel pump locking tool

MrPlow

Member

tottot

Well-Known Member

MrPlow

Member

tottot

Well-Known Member

lynall

Well-Known Member

tottot

Well-Known Member

Similar threads