Diesel or Petrol?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

"Austin Shackles" <[email protected]> wrote in message
news:[email protected]...
> On or around Tue, 25 Apr 2006 21:29:31 +0100, Simon Isaacs
> <[email protected]>
> enlightened us thusly:
>
>>easier way, big long breaker bar and a socket, wedge the breaker bar
>>against the chassis and flick the ignition momentarily until the bolt
>>loosens. Works for me every time.

>
> that only worked in the disco 300 TDi after I a) bought a better breaker
> bar
> (the first one broke - and that had stood up to serious abuse in the past)
> and even then it required the bar to be set a couple of inches above the
> chassis so that it got a bit of momentum. just wedging it against the
> chassis and turning the starter did nothing.
> --
> Austin Shackles. www.ddol-las.net my opinions are just that
> "Remember that to change your mind and follow him who sets you right
> is to be none the less free than you were before."
> Marcus Aurelius Antoninus (121-180), from Meditations, VIII.16


I have found that quick flicks of the key usually works even on the most
tight


 
On or around Fri, 28 Apr 2006 21:54:47 GMT, "icky"
<[email protected]> enlightened us thusly:

>
>"Austin Shackles" <[email protected]> wrote in message
>news:[email protected]...
>>
>> that only worked in the disco 300 TDi after I a) bought a better breaker
>> bar
>> (the first one broke - and that had stood up to serious abuse in the past)
>> and even then it required the bar to be set a couple of inches above the
>> chassis so that it got a bit of momentum. just wedging it against the
>> chassis and turning the starter did nothing.

>
>I have found that quick flicks of the key usually works even on the most
>tight
>


Have you read the instructions for tightening the 300 TDi front bolt?

something along the lines of 59 ft lbs followed by 180 degrees, with loctite
on the threads. I never actually got 180 degrees on it, even with a bit
breaker bar and a bit of tube to make it longer. The bolt just stopped
moving and I didn't see the point in overloading the breaker or the socket
'til something snapped.
--
Austin Shackles. www.ddol-las.net my opinions are just that
Travel The Galaxy! Meet Fascinating Life Forms...
------------------------------------------------\
>> http://www.schlockmercenary.com/ << \ ...and Kill them.

a webcartoon by Howard Tayler; I like it, maybe you will too!
 
Back
Top