Detachable towbar td5?

hi looking for recommendations for a detachable towbar for a disco td5, it is used on greenlanes and off road so ideally looking for something close fitting to the bumper and not a plow

Cheers

You need ONE OF THESE

Mine is factory fitted with this type https://www.ebay.co.uk/itm/HOOK-TOW.../253655415273?_trksid=p2349526.m4383.l4275.c1 , very easy to handle, unfortunately according to UK suppliers it became obsolete

sierrafery said:

Mine is factory fitted with this type https://www.ebay.co.uk/itm/HOOK-TOW.../253655415273?_trksid=p2349526.m4383.l4275.c1 , very easy to handle, unfortunately according to UK suppliers it became obsolete

Click to expand...

That's very neat, is it locked into place (wondering if that's a keyhole under the white flap)?

Yes it's a key hole...if you magnify the picture in the link you can see the key in that plastic bag below the bar

Beware the NAS type receiver hitch shown in the 2nd post is not actually legally Type Approved for use in UK / Europe on the D2. In theory, if you had an accident while towing it could get messy with your insurance company.
In reality, many people use them without any problems that I've heard of.They should be very strong, if made by a recognised company, but watch out for badly made copies of the the original Land Rover branded part.
The Land Rover branded original is rated for 3.5 tons towing weight & I've used ours with a recovery attachment (solid steel block for attaching a large shackle) for recovering very stuck off-road Land Rovers. Never any sign of weakness - as long as your rear chassis is OK - lol.

Another issue to watch our for is the receiver & attachment size. The Land Rover original was made for the US market - so it was based on their 2inch (52mm) standard. Some copies & many of the UK / European made accessories are based on a 50mm standard. Result is either parts not fitting or lots of rattling !

Thanks Pawl, wasn't aware of that at all.