Designa Chassis

Hi, just bought a new 90 chassis. Just tried to fit the trailing arms , and the three bolt plate doesn't line up with the holes on the chassis. Has any one eles had this problem Is there different size plates for different years, or is it just one standard size?? or have they drilled it WRONG

yepp , had the same problem with mine . just turn them a bit and drill more holes . just make sure you drill as far away from the other holes as possible .

cheers mate.Bloody annoying when you have spent £1200 on it.How did you make sure it was centre.

put the bushes in place and tighten them up , they'll centre themselves in the hole . then place the three hole plate where you want it and drill .

cheers mate