Defender wiper stalk functions?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

landy-lee

Well-Known Member
Posts
700
Location
derby
Hi guys

I have just fitted a Programmable Wiper Relay form Mud stuff and i just want to confirm the wiper speeds on the stalk on a 1998 Defender.

From the off position i can go 1 click down into intermittent (program mode)

From the off position up 1 click to constant slow

From the off position up 2 clicks to the constant fast

Im asking because after fitting the new relay it seems bit different to the old one. In a better way i also this the old relay was playing up.

Cheers Landy Lee
 
Last edited:
Does this work on older Ladies with the stalk which is down for manual sweep and two ups for slow and fast, no intermittent delay control e.g. Nineties/OneTens from 1984-1989?
Is it just a change of the relay or is there more to it than that for early models?
 
Hmmm....MudStuff state The Defender Programmable Relay is only compatible with the 300Tdi/Td5/Tdci model Defenders fitted with wiper stalk (PRC7370 or AMR6106) that has the latching intermittent setting.
JGS4x4 do them or similar state: Will not work with early stalk PRC3900 up to GA models.
So I guess no use on mine. Will have to continue to use my finger!
 
Back
Top