Defender td5 cut out and will not start

samjam · Feb 17, 2019

Dear forum
Driving along quite happily when my defender td5 (x reg) just cut out without warning. I haven't been able to start it since. Fuel pump whines when turning on ignition but is making a different sound to usual. Engine turns over fine but no indication of firing. Thought I may have run out of fuel so run the purge sequence but made no difference.
Could it simply be a blocked fuel filter? Didn't really want to remove the fuel pump unnecessarily.
Any insights gratefully received.
Thanks

neilly · Feb 17, 2019

Can you get it on diagnostics?

If I was to hazard a guess, I would look at the Crank sensor.

If you want to check the Fuel pump, pull the fuel pipe off at the FPR and see if you get flow by letting it flow into a bottle.

Cheers

samjam · Feb 17, 2019

Thanks neilly, wouldn't have considered this. Apologies in advance for silly questions but where is the crank sensor located? Also what is the FPR? I'm relatively new to defender owner repairs
Cheers

neilly · Feb 17, 2019

Can you get it on diagnostics?

Crank sensor is on the bell housing, look behind the starter motor.
FPR is Drivers side of engine at the back, you will see the fuel line coming into it.
I would recommend you download the RAVE workshop manual as well.

Cheers

samjam · Mar 23, 2019

Neilly,
Sorry for late reply. You were spot on, it was the crankshaft sensor. Took it out, cleaned it up, put it back and off she went!
New one came in the post today.
Many thanks for your help, saved me a lot of time and expense☺
All the best.

neilly · Mar 23, 2019

Glad to hear it was a simple fix, Thanks for the update.

Cheers

tottot · Mar 23, 2019

Gold star,we like updates. Always good to know outcomes.

Defender td5 cut out and will not start

samjam

Member

neilly

Well-Known Member

samjam

Member

neilly

Well-Known Member

samjam

Member

neilly

Well-Known Member

tottot

Well-Known Member

Similar threads