defender 90 project

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

al3hg

Member
Posts
22
Location
poynton cheshire
Defender 90
E reg no tax or mot
2.5 td
Includes v5, chassis id intact and match.

Stripped down last year,

Rolling chassis with axles and bulk head, gearbox

Chassis very good needs rear cross member which is included in sale,
Painted no other rust or welding needed.

Axles from a td5 rear disks, range rover rims and offroad tyres ok tread,

2.5 td gearbox and transfer box

Polybushed, 2 inch lower strut tops and shock hangers,

Bulk head good condition, no rot to foot wells.
300tdi fusebox loom,

Rear tube has holes drilled for roll cage,
Hard top roof and sides, rear door,

Front wings well dented but can be reused,

Bonnet

All panels in NATO green,

To sum up,
A E reg 90 stripped to rolling chassis .
Includes all panels and parts off dash,
Most of the parts needed are included but may need brackets nuts bolts etc to finish.

Owned her for last few years, change of job has forced the sale.
Don't expect something you can drive straight from the off
Needs finishing 86,000 on the clock couple of old mots etc,

Can deliever, will upload photos at weekend, viewing a must

07580984397 located in the Manchester area.
If you text me first I will ring you back asap.

1000 pound
 
Back
Top