Shane Bottger
New Member
- Posts
- 3
Can anybody help, I have fitted a new clutch to my 1990 Defender and on bleeding it to the slave cylinder , when it builds up the pressure it blew & clutch fluid came out of the bell housing. Any ideas, please?
Defender 90 clutch problems
- Thread starter Shane Bottger
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ratty
I'm not special I'm limited edition
- Posts
- 34,277
Assuming the clutch itself was at fault when it was changed I would say it sounds like one of three things. 1) Incorrectly fitted bearing 2) worn clutch arm 3) incorrectly seated pushrod.
Similar threads
