Defender 90 57 plate

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Gareth Owen

New Member
Posts
1
Location
Warwick
Hello ,
My defender 90 hard top Puma engine 57 plate recently had 2 new spindles replaces on the wiper section.
When I drove off in first gear the engine cut out and the steering went heavy , turned off and started again ...... 5 days of this , symptoms have changed engine running but not power from pressing the accelerator then after 2 minutes or so would carry on as normal . Today another symptom where I stopped at a junction went to pull off no power and the idling was up and down with rather heavy juddering from the engine ......
garage busy until 20 th March ... any help would be great fully appreciated .
I was not sure if any of the wiring has been placed incorrectly when they took the dash off 3 times to fix the spindles ?
Regards
Gareth
Warwickshire
 
Welcome to the forum
wave.gif
 
Welcome Aboard :)

Wot Hippo says - post the question in the right section - this bit is just for intro's, which we like, and we likes piccies too - themz the rulez :D

Too modern for me - what is wiring of which you speak o_O - all electronical stuff is the work of the devil ;)
 
Back
Top