defender 1992 200tdi wiring diagram in colour needed

greyhair · Sep 22, 2014

Hi all
Does anyone have a colour wiring Diagram for a 1992 200tdi
I need to get the main loom repaired as the funds for a new one just aint there at the moment
due to rebuild costs going up and up

thanks as always

Marmaduke · Sep 22, 2014

Can only find one for the 300tdi but most of the colours are the same
http://www.legionlandrover.com/manuales/electrical%20schemes%20-%20defender%20300%20tdi.pdf

Looks about as easy to follow as my sons A level physics books

greyhair · Sep 22, 2014

Marmaduke said:
Can only find one for the 300tdi but most of the colours are the same
http://www.legionlandrover.com/manuales/electrical%20schemes%20-%20defender%20300%20tdi.pdf

Looks about as easy to follow as my sons A level physics books

Glad its not just me then
My head hurts

thank you better get learning me thinks

aaronmorris · Sep 22, 2014

I couldn't find one for the 200tdi either when I have my loom out.
What exactly is wrong with yours? Or just been chopped about over the years.

greyhair · Sep 23, 2014

aaronmorris said:
I couldn't find one for the 200tdi either when I have my loom out.
What exactly is wrong with yours? Or just been chopped about over the years.

Several bits missing
interior lights door switches, loom has been hacked for the head lights etc so wanted to repair it

aaronmorris · Sep 23, 2014

greyhair said:
Several bits missing
interior lights door switches, loom has been hacked for the head lights etc so wanted to repair it

Yeah, Usual case bud

It annoys the f*ck out of me when people chop in here their and everywhere. Although it's bound to happen over 20+ years.

I was lucky in the fact mine wasn't too bad, I looked a mess at first and feared the worse, But when I traced everything back and ripped the added in stuff out. It turned out it was just tapped into the loom once.

Shouldn't be too bad to repair just time consuming following all the wiring diagrams and finding the correct colour wire to replace with if needed.

greyhair · Sep 23, 2014

aaronmorris said:
Yeah, Usual case bud It annoys the f*ck out of me when people chop in here their and everywhere. Although it's bound to happen over 20+ years.

I was lucky in the fact mine wasn't too bad, I looked a mess at first and feared the worse, But when I traced everything back and ripped the added in stuff out. It turned out it was just tapped into the loom once.

Shouldn't be too bad to repair just time consuming following all the wiring diagrams and finding the correct colour wire to replace with if needed.

will have a look at it this week to see what I can do
have purchased a new chassis loom and no doubt will get a new engine loom
but dont fancy getting the main loom would like to try to repair it first

daddy2coull · Sep 23, 2014

I just made a new one using a Haynes manual and a roll of ten core hgv trailer wire

AlbertDefender90 · Sep 23, 2014

Just working out what additions I need for mine before starting, think I'll be making the loom up with loose tails so I can fit plugs etc after fitting.

greyhair · Sep 24, 2014

AlbertDefender90 said:
Just working out what additions I need for mine before starting, think I'll be making the loom up with loose tails so I can fit plugs etc after fitting.

Let me know how you get on Mr
looked at the new chassis loom last night, still no idea

defender 1992 200tdi wiring diagram in colour needed

greyhair

Well-Known Member

Marmaduke

Well-Known Member

greyhair

Well-Known Member

aaronmorris

Head's a shed

greyhair

Well-Known Member

aaronmorris

Head's a shed

greyhair

Well-Known Member

daddy2coull

Active Member

AlbertDefender90

Active Member

greyhair

Well-Known Member

Similar threads