Defender 110 fuel filler neck hole

just replaced the tub on a 300tdi and the filler neck mount hole on the new tub is smaller than the original. Is there a different filler neck i can use?

what have you changed it too ? there are a few new type filler necks, if you phone JR you will get prices similar to the cost of your tub

Not sure what the tub is off but looking on the net the td5 filler neck is just held in with a seal so it could be a td5 tub

Some advice here:

https://www.landyzone.co.uk/land-rover/td5-fuel-tank-into-300tdi-defender.164418/
http://www.defendersource.com/forum/f6/td5-fuel-tank-into-a-300tdi-chassis-15145.html
http://forum.landrovernet.com/showthread.php/224436-Fitting-TD5-fuel-tank-to-300tdi

Personally, I'd ditch it and get a 300tdi tank!

Im not fitting a td5 tank

look for WLH 100570 and WLR 000020

Cheers ive ordered that pipe, is the diameter of the hose the same tho

I don't know, sorry

Rad666 said:

Not sure what the tub is off but looking on the net the td5 filler neck is just held in with a seal so it could be a td5 tub

Click to expand...

Um...

Um what youve just highlighted that i never mentioned a td5 tank

oh yeah, sorry!

What position is the filler hole, in front of the wheelarch , or behind the wheelarch?

neilly said:

What position is the filler hole, in front of the wheelarch , or behind the wheelarch?

Click to expand...

It's a 110 how many have you seen with a filler infront of the wheel arch ?

Foxyred said:

It's a 110 how many have you seen with a filler infront of the wheel arch ?

Click to expand...

Yep, you are right, I went and checked every post except the title.....LOL...........MY BAD......