dash switch panel box

I know mud stuff do switch panels to fill the centre dash on defenders but I want a smaller one I can hide a fuse panel behind and fit a couple if switches etc.

does anyone make one for the series dash?

I have made a small extension panel, to the left of centre on my series 3.
Try not to fill in the dash to much, you will need somewhere for sunglasses and a piece of rag to wipe windows when the bugger steams up in the winter.Even with a heated front screen you will struggle to keep the side windows clear.

I made mine out of some folded aluminium (actually an old shelf)

sexy mods!

I found a panel in ebay for £16, will see how that looks.

I modded my ventilation by adding another hose that comes out of side of dash to clear windows so hoping it's not toooooooo bad when cold weather gets here!

might have to think of ways of sprucing heating up in her at some point though!

panel:
http://bit.ly/1f0nYBH

Thats a bit like mine except mines square and covered in "vinyl effect" black duct tape (you'd never tell )

What are the switches you put in going to be for?

vehicle wiring products sell the lucas type ones like on the main dash

well it's mainly to hide a ground bar and fuse box for auxiliary equipment.

it might lend itself well to future mods but for now I want something atheistic to hide the wiring etc

joe27979 said:

sexy mods!

I found a panel in ebay for £16, will see how that looks.
<snip>

panel:
http://bit.ly/1f0nYBH

Click to expand...

That's a copy of the one that used to come as standard for the extra switches but one piece rather than two. One piece could be better.

fuse board in place to power cig lighter and CB:


hidden behind new fascia: