dash buttons

Just a real quick one
my cruse control switch wont stay pushed in. It works if I hold it in but when I let go the cruse control cuts off
ive ordered a new one off fleebay just dont know how the switch comes out, does the dash have to come off?

I took the front off the dash when I moved mine from it's ridiculous position on the passenger side to a spare position on the extreme right closest to the driver.
A good squirt of contact cleaner may free off your exisiting button.

I think is does need to come out if you try to lever it out is will break the tabs if I remember correctly

Yes data stupid place to the far left I agree

Not stupid when the steering wheels on the other side tho 😄

Chrisfrain2007 said:

Not stupid when the steering wheels on the other side tho 😄

Click to expand...

Lol

Datatek said:

A good squirt of contact cleaner may free off your exisiting button.

Click to expand...

no i think something broke inside it cos it dont even click when pushed

To get the centre part of the dash out you'll need to remove the two side panels of the centre console, then take out the hevac controls and the radio. That should show the screws to undo.

I need to do this job as I need to replace a few bulbs, but I don't have a tool for getting the radio out. Any tips?

odysseus said:

To get the centre part of the dash out you'll need to remove the two side panels of the centre console, then take out the hevac controls and the radio. That should show the screws to undo.

I need to do this job as I need to replace a few bulbs, but I don't have a tool for getting the radio out. Any tips?

Click to expand...

http://www.halfords.com/webapp/wcs/..._productId_210981_langId_-1_categoryId_265879

odysseus said:

To get the centre part of the dash out you'll need to remove the two side panels of the centre console, then take out the hevac controls and the radio. That should show the screws to undo.

I need to do this job as I need to replace a few bulbs, but I don't have a tool for getting the radio out. Any tips?

Click to expand...

As above or feeler gauges

odysseus said:

To get the centre part of the dash out you'll need to remove the two side panels of the centre console, then take out the hevac controls and the radio. That should show the screws to undo.

I need to do this job as I need to replace a few bulbs, but I don't have a tool for getting the radio out. Any tips?

Click to expand...

I never touched the HEVAC

Im hoping the new switch comes tomorrow(it should cos it was sent 1st class yesterday)
Then ive yet another weekend elbows deep in the rangerover
cant remember the last time I had a weekend off that I didnt spend at least a part of it on or under the rr
might even get chance to paint the wheels if the weather drys up