Dash assembly order

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
top drive

top drive

Well-Known Member
Posts
2,694
Location
Peoples republic of culter
Must be 3 years at least since i stripped my dash out and the photos i took are long gone in an old phone And while i can see how most of it goes together , im stumped as to certain pieces.

Namely the grey vented backing piece where the bulkhead vent handles come through, when does that go in ..... Before or after the lower dash. Avd before or after the dash tray pan?

Photos would be good :)
Cheers guys
 
See that was my thoughts....as logically it cant go on at any other stage.

But im at that point .... And it doesnt seem to fit gah, the bit to cover the flexy to the window vent doesnt seem to fit between the dash and the vent levers , gah .
 
Ive found it tight to say the least as well. In fact ive been considering cutting mine down a little, as by the time ive fitted the raptor console and raptor glovebox, you wont see much of it anyway...
 
You must log in or register to reply here.

Similar threads

K
What money should I be asking?
2
Replies
27
Views
7K
Karls
K
DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
3K
DollyBird
DollyBird
Montyjohn
P38A Alternative Thermostat - V8
2
Replies
31
Views
6K
Datatek
Datatek
2
Discovery 2 Solar Setup
Replies
2
Views
2K
2eZero
2
Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
5K
Goc3k
Goc3k
Back
Top