UKAndyB
Member
- Posts
- 35
- Location
- Flintshire. North Wales
Just had to drop our gearbox out due to issue with a bolt jamming in the clutch. Whilst doing the job, I noticed that the reverse switch did not have anything connected to it (it only had two male bullet connectors on a short flying lead) when dropping down the gearbox and transfer box.
I'm sure the reverse light was working a few months ago when we got it.
I have had a look around and a crawl about, but can't find anything ??
My question is, does the cable/wires that connect to the reverse switch on the gearbox come from the back or the front (so I can look in the right area some more!!).
We have a 1989 90, which has the engine and drivetrain from a Discovery 300tdi fitted (all by owner two oners ago).
Thanks for your help people, sooner fish about for the old cable rather than fishing in new.
Andy
I'm sure the reverse light was working a few months ago when we got it.
I have had a look around and a crawl about, but can't find anything ??
My question is, does the cable/wires that connect to the reverse switch on the gearbox come from the back or the front (so I can look in the right area some more!!).
We have a 1989 90, which has the engine and drivetrain from a Discovery 300tdi fitted (all by owner two oners ago).
Thanks for your help people, sooner fish about for the old cable rather than fishing in new.
Andy