D3 autel ap200 suspension calab (solved)

Hi hopefully somebody has some prior knowledge….. I go into services menu on the scanner go to suspension ride height etc , when it comes to the enter height on all 4 wheels , what do I enter the height I want eg 465 front and 485 rears ? or do I measure and enter the actual measurement the wheels are now and it actually takes that and somehow sets it back to correct height per pre programmed?
Sorry if silly just trying be careful messing around with this ?

Hi. The vehicle will self level to the target heights which are saved in the ECU so if you save some heights those will be the level. if you make measurements and the vehicle is on perfect heights save those live readings as target heights even if the values are not 100% equal, important is that the vehicle to be on level and to stop when the correct physical height is reached not some numbers if you see what i mean

So do I enter the figures I want in the tool as I really no idea on how to save heights etc it just asks for numbers and I’m thinking it’s not so simple as just input and it does the rest ?

I dont know what that Autel tool is doing, what ever numbers you insert and save the vehicle will self level to the saved targets once the calibration procedure was completed but the numbers must match with the desired physical heights, that's all i can say, should be something like here

sierrafery said:

I dont know what that Autel tool is doing, what ever numbers you insert and save the vehicle will self level to the saved targets once the calibration procedure was completed but the numbers must match with the desired physical heights, that's all i can say, should be something like here

Click to expand...

Brilliant video many thanks for that I understand now will update how I get on

Much improved after the suspension tweaks maby thanks