Anaconda
Well-Known Member
- Posts
- 4,625
- Location
- Thames Valley
Is there anything specific to a D2 td5 that would make it pull to the left.
It has ACE and rear spring conversion, previous owner, but rest is stock.
It pulls all the time not just under braking.
In 25k miles it has no tyre wear pattern. The following has been done over the past 5 years, not for fault finding, and has made no difference.
4 new tyres
Front springs and shocks
Rear springs and shocks
Track arm with ball joints
Front upper and lower ball joints
Front calipers, discs, pads
Rear discs, pads
Front and rear drop links.
Wheel alignment various times with a 4 wheel laser aligner.
Any suggestions?
It has ACE and rear spring conversion, previous owner, but rest is stock.
It pulls all the time not just under braking.
In 25k miles it has no tyre wear pattern. The following has been done over the past 5 years, not for fault finding, and has made no difference.
4 new tyres
Front springs and shocks
Rear springs and shocks
Track arm with ball joints
Front upper and lower ball joints
Front calipers, discs, pads
Rear discs, pads
Front and rear drop links.
Wheel alignment various times with a 4 wheel laser aligner.
Any suggestions?