CV splines

Hi all,

need to replace my CV / bearings etc as a seal failed and water got in. I have 10 spline front axle but not sure what Landy it is off. Fairly sure not Defender.

It Looks like this



Want to make sure I get the correct CV joint. Also, are the swivel housing bearings etc the same for RRC/early disco and def?

Thanks

Doesn't look like anything i've seen on my 90 nor on my disco by the shape of the flange

Does the flange have a Pt No on it, if it does google it and you may be able to identify it that way. Also your disk / pads looks like they on the way out or you have seized pistons in the caliper, should be an even finish all over the disk (except for small circles at the inner and outer diameters of the disk).

D90mitch said:

Hi all,

need to replace my CV / bearings etc as a seal failed and water got in. I have 10 spline front axle but not sure what Landy it is off. Fairly sure not Defender.

It Looks like this

Want to make sure I get the correct CV joint. Also, are the swivel housing bearings etc the same for RRC/early disco and def?

Thanks

Click to expand...

That's the flanges that were used on the 200tdi Disco - not sure of dates used etc. but that axle type was 100% fitted to early Discos.

Thanks for the info. Thats not my truck in the pic just grabbed it off the net, my truck got nearly new pads and discs