Curling dash
- Thread starter Richtead5
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
It looks like a disco 1 dash. What’s the front edge of the dash like? If it’s also curled up, a repair kit is available, which does work but is a pain to fit!
Have you tried putting something heavy on the affected area and seeing if it will push it down, accenting that it is a small section restricted by the handle etc? If it works, you may be able to use some strong adhesive underneath to hold it down.
Have you tried putting something heavy on the affected area and seeing if it will push it down, accenting that it is a small section restricted by the handle etc? If it works, you may be able to use some strong adhesive underneath to hold it down.
- Posts
- 21,497
- Location
- In the next Glen
Whoever said cut it off make sure to give them a slap.
Use a rubber or leather type glue like this.....(and stick it back down)
Butapren Butaprem 35g Waterproof Glue Rubber Shoe Leather Strong Flexible Joint | eBay
Use a rubber or leather type glue like this.....(and stick it back down)
Butapren Butaprem 35g Waterproof Glue Rubber Shoe Leather Strong Flexible Joint | eBay
Ok thanks for reply an sorry for late reply been searching breakers for a ace valve block connectors lol o front dash looks ok with no other curling anywere. An its a disco 2 with grab handle. Will be a pain to weight down as handle does get in the way abit. And I'll try sticking it down later. Have just got that adhesive glue in post so will give it ago thanks guys, much appreciated
Similar threads
