cruise pipes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

rsjay

New Member
Posts
8
Location
derby
hi all just got a nice p38 but the cruise is in-op the vac pipes on top of the n/s front wing is missing so this is y its in-op but i don't know how to pipe it up and where they go can any one help me please as iv nearly done all the fault now and this is one of the last ones to sort thanks jay
 
Ok you have a pipe that runs from the brake pedal switch, through the bulkhead into the engine bay, it then runs along the bulkhead to where the cruise pump and bellows is, this ends in a T piece, two short pipes then run to the bellows and the vacume pump.

Try to get silicon tube from ebay - I did mine in blue so that it differs from all the other black tubes and pipes in the engine bay.

Hope this helps.
 
Ok you have a pipe that runs from the brake pedal switch, through the bulkhead into the engine bay, it then runs along the bulkhead to where the cruise pump and bellows is, this ends in a T piece, two short pipes then run to the bellows and the vacume pump.

Try to get silicon tube from ebay - I did mine in blue so that it differs from all the other black tubes and pipes in the engine bay.

Hope this helps.
 
You must log in or register to reply here.

Similar threads

S
Freelander 2 (LR2) Brake Pedal Cruise Control Switch
Replies
0
Views
304
Stevelander 2
S
D
Cruise control mind of its own
2
Replies
33
Views
2K
Graculus
Graculus
D
P38A Pls Help Identify Sensor
Replies
3
Views
509
ddauto
D
A
P38A Cruise control
Replies
5
Views
1K
pwood999
pwood999
S
Power steering pipes
Replies
3
Views
679
chrisstdt
chrisstdt
Back
Top