Cruise Control P38 4.6

S

sionnach

Member

Posts

60

• Sep 5, 2011

• #1

Hi guys
i had the engine out and new liners put in a while back. just tried the cruise control and it is no longer working .it was working perfectly fine before hand.
Is it the garage forgetting to do something when engine was put back in ?
or is it just one of those things that I'm learning about the tempermantal p38
any advice would be good

Thanks

Phil

 

West Slope Rover

Well-Known Member

Posts

8,617

Location

deep underground

• Sep 5, 2011

• #2

Have you checked to see that the vacuum lines are connected properly?

 

S

sionnach

Member

Posts

60

• Sep 5, 2011

• #3

Nope , currently at work and am looking for ideas for when I'm off on wednesday to hopefully cure the problem
thanks for advice

 

B

bobbler

New Member

Posts

2,773

Location

County Durham

• Sep 5, 2011

• #4

5 min job to check and 2 mins to fix if it is (reconnect or if split as they do cut off bad bit and reconnect)

 

G

ghostbuster

New Member

Posts

8

• Nov 29, 2011

• #5

Where can I find a diag or pic of the rubber hose curcuit please?

Mike