Disco 2 Crossed B warning light

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Michael fearn

New Member
Posts
3
Location
Salisbery
Hi all,

LR discovery 2, 2.5 TD5:

Turned over but battery went dead before it started.

Replaced the battery- the alarm went off, neither pressing the remote or placing the key in the ignition would switch it off or start it.

Replaced the key fob battery

Tried again, now the dash lights up, a beeping noise starts and there is a crossed B on the dash.

Presumed immobiliser issue, tried to do the key reset EKA code but the barrel lock is broken on the drivers door.

Took the locking mech out including the door handle and black electronic box actuator. Tried turning the actuator with a screw driver (where the barrel lock would normally turn it) - nothing. Replaced the actuator- nothing

Tried all threads on google, at a complete loss.

Please help!!
 

Attachments

  • IMG_4877.JPG
    IMG_4877.JPG
    314 KB · Views: 1,854
  • IMG_4874.JPG
    IMG_4874.JPG
    258.3 KB · Views: 225
Hi all,

LR discovery 2, 2.5 TD5:

Turned over but battery went dead before it started.

Replaced the battery- the alarm went off, neither pressing the remote or placing the key in the ignition would switch it off or start it.

Replaced the key fob battery

Tried again, now the dash lights up, a beeping noise starts and there is a crossed B on the dash.

Presumed immobiliser issue, tried to do the key reset EKA code but the barrel lock is broken on the drivers door.

Took the locking mech out including the door handle and black electronic box actuator. Tried turning the actuator with a screw driver (where the barrel lock would normally turn it) - nothing. Replaced the actuator- nothing

Tried all threads on google, at a complete loss.

Ps I've tried using a nano tech and it responds with "failed to connect to the ECU"

Please help!!
 
Back
Top