Cordless 1/2" Impact Driver

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I'v got an 18v Milwaukee and have been abusing it for over 7 years. Just getting nicely run in. It's so easy taking wheels off that sometimes I do it just so as to hose the mud off the underside of the car. So well worth having. I like the Milwaukee 18v batteries too. They seem to have used the same battery fitting for years, so they've very interchangeable. Unlike De Walt who changed their fitting a while ago. However, you can get adaptors so as to fit Milwaukee batteries to other brands of cordless power tools, and they don't 'arf go!
 
I have 3 dewalts , the big 899 which i seldom use and a medium one which i do use a lot , Also a baby one which doubles up as a driver , i put a driver adaptor on for screws and is used the most of them all . How did i live without them , they make life so much easier so its really working out what you will use it for the most . Or go stupid and buy all 3 sizes as i did .
 
For work use, get a quality make
For diy any of the cheapies will do, dewalt are pretty cheap, and seem to have some decent grunt.

Any of the 1/2 ones are real weapons, but simply to big for most car stuff.

3/8 one with a decent selection of sockets/torx/allen keys is a real time saver, 4 prop bolts 30 secs max, by hand you cant do one in 30 seconds.
 
I've got a dewalt, not sure which model it is but it's bloody useless. It won't crack my landy wheel nuts and if I use it to do them up, I have to give them a half turn with a wheel brace.

Col
 
One of the you tube guys (diagnosedan) who shows how to read fault codes and find the fault uses a 1/4 drive one and often has the bits apart while he's still talking, it seems to say a lot of time.
 
Back
Top