College Project

S

Scotty P

New Member

Posts

6

Location

Aberdeen Scotland

• Apr 11, 2010

• #1

Hi ppl

Im currently doing a college project on a engine hoist for the rover k series engine. I covered rover, mg, lotus and cathram. then though damm it the freelander.

Im looking for some information as i dont know anyone that owns a freelander. I need to know the height of the bonnet and the distance from the from of the car to the engine?

Be very greatful for any info on this or ppl that have used hoist on the freelander in the past to remove the k series.

Kind Regards

Scotty

 

S

Scotty P

New Member

Posts

6

Location

Aberdeen Scotland

• Apr 11, 2010

• #2

anyway one?

 

Sirus

Your all Banned except me

Posts

22,196

Location

The Country of Black

• Apr 11, 2010

• #3

Why would a hairdresser have the need for an engine hoist???

 

Pikey

Dummy Ejection Facilitator..

Posts

47,185

Location

in Baron Wet Bum's Slave pit..

• Apr 11, 2010

• #4

To get their fat lazy arses out of bed in a morning.??

 

S

Scotty P

New Member

Posts

6

Location

Aberdeen Scotland

• Apr 11, 2010

• #5

cheers

 

S

Scotty P

New Member

Posts

6

Location

Aberdeen Scotland

• Apr 11, 2010

• #6

Sirus said:

Why would a hairdresser have the need for an engine hoist???

Click to expand...

the old guy with the bread might tho!

 

B

brooksy

New Member

Posts

42

• Apr 11, 2010

• #7

hi

i have a TD4 but the body shape should be the same, i can get some measurements for you tomorrow if you wish,

and good luck with that coursework!
matt...

 

S

Scotty P

New Member

Posts

6

Location

Aberdeen Scotland

• Apr 11, 2010

• #8

brooksy said:

hi

i have a TD4 but the body shape should be the same, i can get some measurements for you tomorrow if you wish,

and good luck with that coursework!
matt...

Click to expand...

cheers mate that would be spot on. i have got a picture off of here aswell

Scotty

 

B

brooksy

New Member

Posts

42

• Apr 12, 2010

• #9

Hi

here are the measurements,

Height from floor to edge of engine bay - 1m
distance from front bumper to middle of engine block - 0.9 m
height from engine block to bonnet - 0.6m

hope this helps.

matt..

 

S

Scotty P

New Member

Posts

6

Location

Aberdeen Scotland

• Apr 13, 2010

• #10

brooksy said:

Hi

here are the measurements,

Height from floor to edge of engine bay - 1m
distance from front bumper to middle of engine block - 0.9 m
height from engine block to bonnet - 0.6m

hope this helps.

matt..

Click to expand...

Prefect dude, just one thing is that from the top of the block or the bottom?

 

B

brooksy

New Member

Posts

42

• Apr 13, 2010

• #11

The height is from the top of the block to the bonnet, thought it might be usefull, so that you can see how much room there is, oh and by top of block I mean the distance from the plastic cover to the bonnet.

The distance bumper to middle of block was measured from the top of the engine so its the minimum horizontal distance you have to work with.

Oh and sorry if there is random formatting, I'm writing this on my blackberry,

Thanks matt...