Clutch

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

colross

New Member
Posts
5
Location
kirkwall
Hi new to the forum need some help if possible. Just replaced the clutch and slave cylinder on an 02 freelander td4, the pedal has no feel and no gear selection. I have bled down the way pumping the pedal and tried reverse bleeding back up the way and there appears to be no air in the system. I then disconnected the pipe to check the master cylinder and the pedal is rock solid as it should be, any ideas would be great.
Regards
 
Hi new to the forum need some help if possible. Just replaced the clutch and slave cylinder on an 02 freelander td4, the pedal has no feel and no gear selection. I have bled down the way pumping the pedal and tried reverse bleeding back up the way and there appears to be no air in the system. I then disconnected the pipe to check the master cylinder and the pedal is rock solid as it should be, any ideas would be great.
Regards

Welcome to lz! :)

Try posting about that in the freelander section! ;)
 
Back
Top